경희대학교치과병원

의료진 소개

보존과
장석우 교수

관심의료진

전문분야

심미수복, 근관치료, 미세치근단수술

진료일정

진료과 센터 암병원

오전
오후

직위

병원	교수

경력 및 연수

~	경희대학교치과병원 보존과 교수
~	성균관대학교 의과대학 삼성서울병원 치과 보존과 조교수

학회활동

~	現 대한근관치료학회 재무이사

저서

2018.06	(임상가를 위한) 비외과적 근관치료의 길라잡이
2017.04	근관치료학
2016.12	노인치의학
2016.09	MTA 쉽게 배워 바로 쓰기
2014.03	Problem solving in Endodontics

논문

2023.03	Mechanical Properties of NiTi Rotary Files Fabricated through Gold-Wire, CM-Wire, T-Wire, and R-Phase Heat Treatment
2021.08	Evaluation of Cyclic Fatigue and Bending Resistance of Coronal Preflaring NiTi File Manufactured with Different Heat Treatments
2020.12	Bending resistance and cyclic fatigue resistance of WaveOne Gold, Reciproc Blue, and HyFlex EDM instruments
2020.11	Morphological measurements of two separate mesiobuccal canals in maxillary first molars using micro-computed tomography
2020.09	Sealing Ability of AH plus and GuttaFlow Bioseal
2020.06	Three-Dimensional Analysis of Root Anatomy and Root Canal Curvature in Mandibular Incisors Using Micro-Computed Tomography with Novel Software
2020.04	Effect of autoclave sterilization on cyclic fatigue and torsional fracture resistance of NiTi rotary instruments
2020.01	Synthetic Human beta Defensin-3-C15 Peptide in Endodontics: Potential Therapeutic Agent in Streptococcus gordonii Lipoprotein-Stimulated Human Dental Pulp-Derived Cells
2020.01	In Vitro Characterization of Dental Pulp Stem Cells Cultured in Two Microsphere-Forming Culture Plates
2019.11	Torsional and Bending Properties of v Taper 2H, ProTaper NEXT, NRT, and One Shape
2019.03	Influence of proper or reciprocating optimum torque reverse kinematics on cyclic fatigue of four single files
2018.08	Dentinal tubule sealing effects of 532-nm diode-pumped solid-state laser, gallic acid/Fe3+ complex, and three commercial dentin desensitizers
2018.05	Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of M3 Rotary and M3 Pro Gold NiTi files
2018.04	Novel Calcium Zirconate Silicate Cement Biomineralize and Seal Root Canals
2018.01	Chemical Composition and Porosity Characteristics of Various Calcium Silicate-Based Endodontic Cements
2017.12	Intratubular Biomineralization in a Root Canal Filled with Calcium-Enriched Material over 8 Years
2017.11	Mechanical and Metallurgical Properties of Various Nickel-Titanium Rotary Instruments
2017.10	Stress Generation during Pecking Motion of Rotary Nickel-titanium Instruments with Different Pecking Depth
2017.09	Antifungal Effects of Synthetic Human Beta-defensin-3-C15 Peptide on Candida albicans–infected Root Dentin
2017.05	The Effect of Hydrofluoric Acid Surface Treatment on the Cyclic Fatigue Resistance of K3 NiTi Instruments
2017.04	The metallurgical and mechanical characteristics of controlled memory wire based nickel-titanium endodontic instruments
2017.02	Effect of Different Agitation Techniques on the Penetration of Irrigant and Sealer into Dentinal Tubules
2016.11	Fracture Resistance of K3 Nickel-Titanium Files Made from Different Thermal Treatments
2016.11	Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of V taper 2 and V taper 2H rotary NiTi files
2016.07	Various heat-treated nickel–titanium rotary instruments evaluated in S-shaped simulated resin canals
2016.05	Antibacterial effects of N-acetylcysteine against endodontic pathogens
2016.05	Combined effects of mineral trioxide aggregate and human placental extract on rat pulp tissue and growth, differentiation and angiogenesis in human dental pulp cells
2016.05	Antifungal effects of synthetic human β-defensin 3-C15 peptide
2016.03	Evaluation of three obturation techniques in the apical third of mandibular first molar mesial root canals using micro-computed tomography
2016.02	Combined Effects of Growth Hormone and Mineral Trioxide Aggregate on Growth, Differentiation, and Angiogenesis in Human Dental Pulp Cells
2016.02	Effect of acidic solutions on the microhardness of dentin and set OrthoMTA and their cytotoxicity on murine macrophage
2015.12	The effects of defect type and depth, and measurement direction on the implant stability quotient value
2015.10	Effect of preheating on the viscoelastic properties of dental composite under different deformation conditions
2015.09	Odontoblastic Differentiation, Inflammatory Response, and Angiogenic Potential of 4 Calcium Silicate-based Cements: Micromega MTA, ProRoot MTA, RetroMTA, and Experimental Calcium Silicate Cement
2015.08	Comparison of mandibular first molar mesial root canal morphology using micro-computed tomography and clearing technique
2015.06	Effect of repetitive pecking at working length for glide path preparation using G-file
2015.04	Three-dimensional modelling and concurrent measurements of root anatomy in mandibular first molar mesial roots using micro-computed tomography
2015.03	Comparison of the rheological properties of four root canal sealers
2015.02	Bone cement grafting increases implant primary stability in circumferential cortical bone defects
2015.02	Safe way for using NiTi rotary files
2014.12	Bacterial entombment by intratubular mineralization following orthograde mineral trioxide aggregate obturation: a scanning electron microscopy study
2014.10	In Vitro Biocompatibility, Inflammatory Response, and Osteogenic Potential of 4 Root Canal Sealers: Sealapex, Sankin Apatite Root Sealer, MTA Fillapex, and iRoot SP Root Canal Sealer
2014.10	Deferoxamine promotes osteoblastic differentiation in human periodontal ligament cells via the nuclear factor erythroid 2-related factor-mediated antioxidant signaling pathway
2014.09	Autotransplantation of mesiodens for missing maxillary lateral incisor with cone-beam CT-fabricated model and orthodontics
2014.08	Effects of Calcium Silicate Endodontic Cements on Biocompatibility and Mineralization-inducing Potentials in Human Dental Pulp Cells
2014.08	Shaping Ability of the Conventional Nickel-Titanium and Reciprocating Nickel-Titanium File Systems: A Comparative Study Using Micro-Computed Tomography
2014.07	Trace metal contents of three tricalcium silicate materials: MTA Angelus, Micro Mega MTA and Bioaggregate
2014.06	The role of SDF-1 and CXCR4 on odontoblastic differentiation in human dental pulp cells
2014.06	Comparison of the shaping abilities of three nickel-titanium instrumentation systems using micro-computed tomography
2014.06	Study on Biocompatibility and Mineralization Potential of Capseal
2014.03	Comparison of Alternative Image Reformatting Techniques in Micro-Computed Tomography and Tooth Clearing for Detailed Canal Morphology
2014.01	Effects of ProRoot MTA, Bioaggregate, and Micromega MTA on Odontoblastic Differentiation in Human Dental Pulp Cells
2013.12	Analysis of six heavy metals in Ortho mineral trioxide aggregate and ProRoot mineral trioxide aggregate by inductively coupled plasma-optical emission spectrometry
2013.12	Antibacterial Efficacy of a Human beta-Defensin-3 Peptide on Multispecies Biofilms
2013.12	Chemical constitution, morphological characteristics, and biological properties of ProRoot mineral trioxide aggregate and Ortho mineral trioxide aggregate
2013.11	Effect of heat treatment on cyclic fatigue resistance, thermal behavior and microstructures of K3 NiTi rotary instruments
2013.09	A micro-computed tomography study of canal configuration of multiple-canalled mesiobuccal root of maxillary first molar (vol 17, pg 1541, 2013)
2013.09	Microbial Analysis in Primary and Persistent Endodontic Infections by Using Pyrosequencing
2013.09	Three-dimensional Analysis of Root Canal Curvature and Direction of Maxillary Lateral Incisors by Using Cone-beam Computed Tomography.
2013.09	Growth Inhibition and Apoptosis-Inducing Effects of Cudraflavone B in Human Oral Cancer Cells via MAPK, NF-κB, and SIRT1 Signaling Pathway
2013.05	Long-term observation of the mineral trioxide aggregate extrusion into the periapical lesion: a case series
2013.05	Antimicrobial efficacy of a human -defensin-3 peptide using an Enterococcus faecalis dentine infection model
2013.03	Antimicrobial effect of alexidine and chlorhexidine against Enterococcus faecalis infection
2013.03	In-depth morphological study of mesiobuccal root canal systems in maxillary first molars: review
2012.09	A biometric study of C-shaped root canal systems in mandibular second molars using cone-beam computed tomography
2012.01	Chemical Interaction of Alexidine and Sodium Hypochlorite
2011.12	Heavy Metal Analysis of Ortho MTA and ProRoot MTA
2011.11	Minimum-intensity projection for in-depth morphology study of mesiobuccal root
2011.11	Evaluation of pH and calcium ion release in capseal I and II and in two other root canal sealers
2011.06	Mesiobuccal root canal anatomy of Korean maxillary first and second molars by cone-beam computed tomography
2011.03	The effect of obturator bulb height on speech in maxillectomy patients
2010.10	Human Periodontal Ligament Cell Response to a Newly Developed Calcium Phosphate-based Root Canal Sealer
2010.05	Effects of Blood Contamination on Microtensile Bond Strength to Dentin of Three Self-etch Adhesives
2010.04	A comparison of nickel-titanium rotary instruments manufactured using different methods and cross-sectional areas: ability to resist cyclic fatigue
2010.04	Analysis of heavy metal contents in gray and white MTA and 2 kinds of Portland cement: a preliminary study

학술활동

Cyclic fatigue resistance of Reciproc and Mtwo files in reciprocating motion
Cutaneous odontogenic fistula in nasolabial fold region : a case report
Successful healing of large periapical lesions with non-surgical endodontic treatment : a case report
chemical constitution, morphological characteristics, and bioloigcal properties of ortho MTA and proroot MTA
Root canal treatment of permanent three-rooted 5 canalled mandibular first molars using a microscope and cone-beam computed tomography imaging
management of fused tooth in patient with OFCD syndrome
Treatment of intermediary mesial canals in mandibular first molars
Endodontic management of mandibular second molar with anatomical variations
Is endodontic treatment necessary to treat vertical root fracture(VRF)?
Effects of Dentalix on tooth bleaching and removal of smear layer
Management of teeth with crown-root fracture using orthodontic extrusion
Regenerative endodontic treatment of immature permanent teeth
Understanding and Clinical Application of Mineral Trioxide Aggregate
Autotransplantation of teeth to replace unrestorable molar: case reports
Measurement of root anatomy in mandibular incisors of Koreans using micro-computed tomography
The torsional strength and cyclic fatigue resistance of four Nickel-Titanium rotary files
Understanding of Mineral Trioxide Aggregate and its clinical applicatin
Root Canal Anatomy in Clinical Endodontics
The management of furcal defect of mandiular defect of mandibular molar by bicuspidization
autotransplantation of third molars: case report
managament of immature permanent premolars wtih apical periodontitis
Fracture resistance of K3 nickel-titanium instruments made from different thermal treatments
repetitive torsionl resistance of nickel-titanium rotary instruments
근관치료에서 할 것과 하지 말아야 할 것
Comparison between HEBP and EDTA as chelating agent for root canal irrigation
Torsional resistance and metallurgical characteristics of conventional Ni-Ti wire and CM-wire based rotary Ni-Ti files
management of periradicular defects on maxillary molar by surgical intervention
Treatment of large defect of root structures with mineral trioxide aggregate
NiTi file을 사용한 안전하고 효율적인 근관치료
Root canal treatment of a mandibular premolar with three root canals: 2 case reports
The effect of hydrofluoric acid surface treatment on the cyclic fatigue resistance of K3 instruments
Dentinal Tubule Sealing Effect of Diode Laser and Desensitizing Agents
Virtual surgical simulation for delayed autotransplantation with large periapical lesion: a case report
Conservative rehabilitation of anterior edentulous space
Characterization of CAD/CAM resin inlay using surface sealant
Conservative treatment of hemisected mandibular molar using CAD/CAM inlay retained restoration
Bending stiffness and cyclic fatigue resistance of WaveOne Gold, Reciproc Blue, and HyFlex EDM instruments
The prognosis of teeth with calcified and unnegotiable root canals
Rehabilitation of severely damaged maxillary incisor with customized translucent FRC post
Restoration of paramolar tooth with deep dental caries using stamp technique
Precisely targeted endodontic microsurgery: using 3-dimensional-printed surgical guide and trephine bur
Retreatment of failed revascuralization of an immature traumatized maxillary incisor
Effect of elastin-like polypeptide incorporation on the adhesion property and maturation of mineral trioxide aggregates
Leakage of interfaces between dentin, sealer, and gutta-percha using different type of sealers
A randomized controlled trial of bleaching toothpaste with two different concentration of hydrogen peroxide
Effect of cementation protocols, curing mode, and thermocycling on push-out bond strength of fiber post
The effect of C-factor and adhesive on bonding of a dual-cure resin composite
The treatment of post-traumatic external cervical resorption in adolescents
Multidisciplinary restoration of traumatized retained root with endocrown on maxillary incisor
Treatment of Peg lateralis using No-prep ceramic laminate veneer
Rehabilitation of traumatized maxillary anterior tooth using surgical extrusion with 180˚ rotation
Delayed autotransplantation using a 3D-printed surgical guide for more efficient osteotomy
Comparative study of the dentin bond strength of various dentin adhesives
Effect of film thickness of resin cement on various CAD/CAM restoratives
Evaluation of mechanical properties of flowable resin composite
Effects of minieral trioxide aggregtates on viability and mineralization potential of 3-dimensional culutred dental pulp stem cells